Créé le : 03/08/2009
SN2002-00032
Lenoir Y.
Frottements aux basses vitesses: Etude au moyen d'un pendule.
Technique Moderne
Vol.42, Nr.4-6, 2001
P.25-33
SN2002-00158
Teyssandier F.
Couches minces de céramique à frottement réduit.
Revue Polytechnique
Nr.1653, Novembre 2001
P.707-709
SN2002-00206
X
Essais, mesure, contrôle - Mesure de la distribution et de l'intensité des contraintes.
Materiaux et Techniques
Vol.89, Nr.7-8, 2001
P.46
SN2002-00292
Munsi, A S M Y, Waddell, A J, Walker, C A
The Influence of Vibratory Treatment on the Fatigue Life of Welds: A Comparison with Thermal Stress Relief.
Strain
Vol.37, Nr.4, 2001
P.141-150
SN2002-00298
Mukai, Minoru, Takahashi, Hiroyuki, Kawakami, Takashi, Takahashi, Kuniaki
Fracture & Fatigue - Experimental and Numerical Verification of Fatigue Life Estimation for Solder Bumps.
JSME International Journal - Series A - Solid Mechanics and Material Engineering
Vol.44, Nr.4, 2001
P.567-572
SN2002-00300
Goshima, Takahito, Ishihara, Sotomi, Shimizu, Masayoshi, Soda, Toshimichi
Fracture & Fatigue - Mutual Interference of Two Subsurface Cracks in a Semi-infinite Body Due to Rolling Contact with Frictional Heating.
JSME International Journal - Series A - Solid Mechanics and Material Engineering
Vol.44, Nr.4, 2001
P.542-549
SN2002-00302
Sakagami, Takahide, Kubo, Shiro
Material Evaluation - Development of a New Crack Identification Technique Based on Near-Tip Singular Electrothermal Field Measured by Lock-in Infrared Thermography.
JSME International Journal - Series A - Solid Mechanics and Material Engineering
Vol.44, Nr.4, 2001
P.528-534
SN2002-00303
Yuri, lsao, Hisamatsu, Tohru, Etori, Yoshiyuki, Yamamoto, Tohru
Material Evaluation - Degradation of Silicon Carbide in Combustion Gas Flow at High Temperature and High Speed.
JSME International Journal - Series A - Solid Mechanics and Material Engineering
Vol.44, Nr.4, 2001
P.520-527
SN2002-00309
Morita, Tatsuro, Araki, Shigetoshi, Saito, Kenji
Computational Mechanics - Shielding Effect of Emitted Dislocations on Fatigue Crack Propagation.
JSME International Journal - Series A - Solid Mechanics and Material Engineering
Vol.44, Nr.4, 2001
P.453-461
SN2002-00321
Cantrell, John H, Yost, William T
Nonlinear ultrasonic characterization of fatigue microstructures.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.487-490
SN2002-00322
Zilberstein, Vladimi, Schlicker, Darrell, Walrath, Karen, Weiss, Volker
MWM eddy current sensors for monitoring of crack initiation and growth during fatigue tests and in service.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.477-486
SN2002-00323
Favro, L D, Thomas, R L, Han, X, Ouyang, Z
Sonic infrared imaging of fatigue cracks.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.471-476
SN2002-00324
Welch, D E, Hively, L M, Holdaway, R F
Nonlinear crack growth monitoring.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.463-470
SN2002-00325
Namjoshi, S A, Mall, S
Fretting behavior of Ti-6Al-4V under combined high cycle and low cycle fatigue loading.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.455-462
SN2002-00326
Hutson, A L, Nicholas, T, Olson, S E, Ashbaugh, N E
Effect of sample thickness on local contact behavior in a flat-on-flat fretting fatigue apparatus.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.445-454
SN2002-00327
Pape, J A, Neu, R W
Fretting fatigue damage accumulation in PH 13-8 Mo stainless steel.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.437-444
SN2002-00328
Goh, C-H, Wallace, J M, Neu, R W, Mcdowell, D L
Polycrystal plasticity simulations of fretting fatigue.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.423-436
SN2002-00329
Peters, J O, Ritchie, R O
Foreign-object damage and high-cycle fatigue: role of microstructure in Ti-6Al-4V.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.413-422
SN2002-00330
Thompson, Steven R, Ruschau, John J, Nicholas, Theodore
Influence of residual stresses on high cycle fatigue strength of Ti-6Al-4V subjected to foreign object damage.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.405-412
SN2002-00331
Baragetti, S, La Vecchia, G M, Terranova, A
Analysis of fatigue crack propagation in nickel-plated components.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.395-404
SN2002-00332
Bonnen, J J F, Conle, F A, Topper, T H
The role of in-phase and out-of-phase overloads on the torsional fatigue of normalized SAE-1045 steel.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.385-394
SN2002-00333
Webster, G A, Ezeilo, A N
Residual stress distributions and their influence on fatigue lifetimes.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.375-384
SN2002-00334
Vasudevan, A K, Sadananda, K
Analysis of fatigue crack growth under compression-compression loading.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.365-374
SN2002-00335
Sadananda, K, Sreenivasan, R
Analysis of fatigue crack growth behavior in niobium-hydrogen alloys using the unified approach to fatigue damage.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.357-364
SN2002-00336
Bellinger, N C, Komorowski, J P, Benak, T J
Residual life predictions of corroded fuselage lap joints.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.349-356
SN2002-00337
Wanhill, R J H, Koolloos, M F J
Fatigue and corrosion in aircraft pressure cabin lap splices.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.337-348
SN2002-00338
Nayeb-Hashemi, H, Yang, Pinghu
Mixed mode I/II fracture and fatigue crack growth along 63 Sn-37 Pb solder/brass interface.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.325-336
SN2002-00339
Bache, M R, Evans, W J
The fatigue crack propagation resistance of Ti-6Al-4V under aqueous saline environments.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.319-324
SN2002-00340
Fonte, M A, Stanzl-Tschegg, S E, Holper, B, Tschegg, E K
The microstructure and environment influence on fatigue crack growth in 7049 aluminum alloy at different load ratios.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.311-318
SN2002-00341
Ramsamooj, D V, Shugar, T A
Modeling of corrosion fatigue in metals in an aggressive environment.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.301-310
SN2002-00342
Ramsamooj, D V, Shugar, T A
Model prediction of fatigue crack propagation in metal alloys in laboratory air.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.287-300
SN2002-00343
Sadananda, K, Vasudevan, A K, Holtz, R L
Extension of the Unified Approach to fatigue crack growth to environmental interactions.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.277-286
SN2002-00344
Bray, G H, Glazov, M, Rioja, R J, Li, D
Effect of artificial aging on the fatigue crack propagation resistance of 2000 series aluminum alloys.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.265-276
SN2002-00345
Biner, S B
Fatigue crack growth studies under mixed-mode loading.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.259-264
SN2002-00346
Moshier, M A, Nicholas, T, Hillberry, B M
Load history effects on fatigue crack growth threshold for Ti-6Al-4V and Ti-17 titanium alloys.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.253-258
SN2002-00347
Kim, J H, Lee, S B
Behavior of plasticity-induced crack closure and roughness-induced crack closure in aluminum alloy.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.247-252
SN2002-00348
Kujawski, Daniel
A fatigue crack driving force parameter with load ratio effects.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.239-246
SN2002-00349
Stanzl-Tschegg, S E, Mayer, H
Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.231-238
SN2002-00350
Komotori, J, Shimizu, M, Misaka, Y, Kawasaki, K
Fatigue strength and fracture mechanism of steel modified by super-rapid induction heating and quenching.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.225-230
SN2002-00351
Stoudt, M R, Ricker, R E, Cammarata, R C
The influence of a multilayered metallic coating on fatigue crack nucleation.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.215-224
SN2002-00352
Obergfell, K, Peralta, P, Martinez, R, Michael, J R
Effects of grain size and mechanical pretreatment on strain localization in FCC polycrystals.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.207-214
SN2002-00353
Wu, X, Deng, W, Koul, A, Immarigeon, J-P
A continuously distributed dislocation model for fatigue cracks in anisotropic crystalline materials.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.201-206
SN2002-00354
Carstensen, J V, Magnin, T
Characterisation and quantification of multiple crack growth during low cycle fatigue.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.195-200
SN2002-00355
Chu, C-C, Chernenkoff, R A
Crack closure-based analysis of fatigue tests with mean stresses.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.187-194
SN2002-00356
Liao, Min, Shi, G, Xiong, Y
Analytical methodology for predicting fatigue life distribution of fuselage splices.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.177-186
SN2002-00357
Chapetti, Mirco D
Prediction of the fatigue limit of blunt-notched components.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.171-176
SN2002-00358
Lacarac, V D, Smith, D J, Pavier, M J
The effect of cold expansion on fatigue crack growth from open holes at room and high temperature.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.161-170
SN2002-00359
Bache, M R, Evans, W J, Suddell, B, Herrouin, F R M
The effects of texture in titanium alloys for engineering components under fatigue.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.153-160
SN2002-00360
Bathias, C, Drouillac, L, Le François, P
How and why the fatigue S-N curve does not approach a horizontal asymptote.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.143-152
SN2002-00361
Kobayashi, Takao, Shockey, Donald A
The relationship between fracture surface roughness and fatigue load parameters.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.135-142
SN2002-00362
Liu, K C, Wang, J A
An energy method for predicting fatigue life, crack orientation, and crack growth under multiaxial loading conditions.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.129-134
SN2002-00363
Laz, P J, Craig, B A, Hillberry, B M
A probabilistic total fatigue life model incorporating material inhomogeneities, stress level and fracture mechanics.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.119-128
SN2002-00364
Pommier, S
A study of the relationship between variable level fatigue crack growth and the cyclic constitutive behaviour of steel.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.111-118
SN2002-00365
Evans, W J, Bache, M R, Nicholas, P J
The prediction of fatigue life at notches in the near alpha titanium alloy Timetal 834.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.103-110
SN2002-00366
Mcmaster, F J, Smith, D J
Predictions of fatigue crack growth in aluminium alloy 2024-T351 using constraint factors.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.93-102
SN2002-00367
Pan, J, Nicholas, T
Effects of mean stresses on multiaxial fatigue life prediction based on fracture mechanics.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.87-92
SN2002-00369
Sarkani, Shahram, Michaelov, George, Kihl, David P
Stochastic fatigue damage accumulation in a T-welded joint accounting for the residual stress fields.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.71-78
SN2002-00370
Staroselsky, A, Vestergaard, L, Annigeri, B, Favrow, L
Three-dimensional fatigue cracking under elastic-plastic deformation.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.65-70
SN2002-00371
Morrissey, R J, Mcdowell, D L, Nicholas, T
Microplasticity in HCF of Ti-6Al-4V.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.55-64
SN2002-00372
Vasudevan, A K, Sadananda, K, Glinka, G
Critical parameters for fatigue damage.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.39-54
SN2002-00373
Zhuang, Wyman Z, Halford, Gary R
Investigation of residual stress relaxation under cyclic load.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.31-38
SN2002-00374
Terada, Hiroyuki
Structural fatigue and joint degradation.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.21-30
SN2002-00375
Boyd-Lee, A D, Harrison, G F, Henderson, M B
Evaluation of standard life assessment procedures and life extension methodologies for fracture-critical components.
International Journal of Fatigue
Vol.23, Nr.1 part: SUPPL, 2001
P.11-20
SN2002-00380
D'Errico, G E, Bugliosi, S, Cuppini, D
Erosion of ceramics and cermets.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.448-453
SN2002-00390
Kopac, J, Sokovic, M, Dolinsek, S
Tribology of coated tools in conventional and HSC machining.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.377-384
SN2002-00409
Blake, Y
Sliding wear prediction of ductile materials.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.205-211
SN2002-00422
Wahab, M A, Sakano, M
Experimental study of corrosion fatigue behaviour of welded steel structures.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.116-121
SN2002-00430
Haque, M M, Sharif, A
Study on wear properties of aluminium-silicon piston alloy.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.69-73
SN2002-00431
Sharma, S C, Satish, B M, Girish, B M, Somashekar, D R
Wear characteristics of phosphor-bronze/silicon carbide particulate composites.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.65-68
SN2002-00434
Alzaharnah, I T, Hashmi, M S, Yilbas, B
Thermal stresses in thick-walled pipes subjected to fully developed laminar flow.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.50-57
SN2002-00435
Kewther Ali, M, Hashmi, M S J, Yilbas, B S
Fatigue properties of the refurbished INCO-617 alloy.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.45-49
SN2002-00437
Sakano, M, Wahab, M A
Extremely low cycle (ELC) fatigue cracking behaviour in steel bridge rigid frame piers.
Journal of Materials Processing Technology
Vol.118, Nr.1, 2001
P.36-39
SN2002-00466
Nishino, Takashi, Hirokane, Daisuke, Nakamae, Katsuhiko
X-ray diffraction studies of the environmental deterioration of a transversely loaded carbon-fibre-reinforced composite.
Composites Science and Technology
Vol.61, Nr.16, 2001
P.2455-2460
SN2002-00468
Chen, A S, Almond, D P, Harris, B
In situ monitoring in real time of fatigue-induced damage growth in composite materials by acoustography.
Composites Science and Technology
Vol.61, Nr.16, 2001
P.2437-2444
SN2002-00472
Srivastava, V K, Kawada, Hiroyuki
Fatigue behaviour of alumina-fibre-reinforced epoxy resin composite pipes under tensile and compressive loading conditions.
Composites Science and Technology
Vol.61, Nr.16, 2001
P.2393-2404
SN2002-00476
Yilmaz, O, Turhan, H
The relationships between wear behavior and thermal conductivity of CuSn/M 7 C 3-M 23 C 6 composites at ambient and elevated temperatures.
Composites Science and Technology
Vol.61, Nr.16, 2001
P.2349-2360
SN2002-00482
Attia, O, Kinloch, A J, Matthews, F L
Modelling the fatigue life of polymer-matrix fibre-composite components.
Composites Science and Technology
Vol.61, Nr.15, 2001
P.2273-2284
SN2002-00500
Sato, Y, Takeda, Y, Shoji, T
Non-destructive evaluation of fatigue and creep-fatigue damage by means of the induced-current focused potential drop technique.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.885-894
SN2002-00501
Ohtani, R, Tada, N, Shibata, M, Taniyama, S
High temperature fatigue of the nickel-base single-crystal superalloy CMSX-10.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.867-876
SN2002-00502
Okazaki, M, Okamoto, M, Harada, Y
Interfacial fatigue crack propagation in Ni-base superalloy protective coatings.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.855-866
SN2002-00503
Itoh, Y, Saitoh, M, Takaki, K, Fujiyama, K
Effect of high-temperature protective coatings on fatigue lives of nickel-based superalloys.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.843-854
SN2002-00504
Jono, M, Sugeta, A, Uematsu, Y
Atomic force microscopy and the mechanism of fatigue crack growth.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.831-842
SN2002-00505
Akiniwa, Y, Tanaka, K, Kimura, H
Microstructural effects on crack closure and propagation thresholds of small fatigue cracks.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.817-830
SN2002-00506
Minoshima, K, Obara, K, Minamino, N, Komai, K
Environmental fatigue crack growth in titanium aluminides and hydrogen evolution behaviour.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.803-816
SN2002-00507
Kondo, Y, Bodai, M
The fretting fatigue limit based on local stress at the contact edge.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.791-802
SN2002-00508
Shiozawa, K, Lu, L, Ishihara, S
S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon-chromium bearing steel.
Fatigue and Fracture of Engineering Materials and Structures
Vol.24, Nr.12, 2001
P.781-790
SN2002-00532
Webster, G A, Wimpory, R C
Non-destructive measurement of residual stress by neutron diffraction.
Journal of Materials Processing Technology
Vol.117, Nr.3, 2001
P.395-399
SN2002-00599
Kim, H, Kedward, K T
Stress Analysis of Adhesively-bonded Joints Under In-plane Shear Loading.
Journal of Adhesion
Vol.76, Nr.1, 2001
P.1-36
SN2002-00602
Wan, K-T
Adherence of an Axisymmetric Flat Punch on a Thin Flexible Membrane.
Journal of Adhesion
Vol.75, Nr.4, 2001
P.369-380
SN2002-00694
Prasad, B K, Modi, O P, Jha, A K, Dasgupta, R
Erosion-corrosion-abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid.
Materials Science and Technology - London
Vol.17, Nr.11, 2001
P.1444-1450
SN2002-00698
Knowles, D M, Skelton, D K
High temperature fatigue of a polycrystalline nickel base superalloy.
Materials Science and Technology - London
Vol.17, Nr.11, 2001
P.1403-1412
SN2002-00714
Tonder, Kristian
Inlet roughness tribodevices: dynamic coefficients and leakage.
Tribology International
Vol.34, Nr.12, 2001
P.847-852
SN2002-00715
Björklund, Stefan
The influence of surface roughness in elliptical contacts.
Tribology International
Vol.34, Nr.12, 2001
P.841-846
SN2002-00716
Kalin, Mitjan, Vizintin, Joze
Comparison of different theoretical models for flash temperature calculation under fretting conditions.
Tribology International
Vol.34, Nr.12, 2001
P.831-840
SN2002-00717
Vick, Brian, Furey, Michael J
A basic theoretical study of the temperature rise in sliding contact with multiple contacts.
Tribology International
Vol.34, Nr.12, 2001
P.823-830
SN2002-00718
Boschkova, K, Kronberg, B, Rutland, M, Imae, T
Study of thin surfactant films under shear using the tribological surface force apparatus.
Tribology International
Vol.34, Nr.12, 2001
P.815-822
SN2002-00720
Holmberg, Kenneth
Reliability aspects of tribology.
Tribology International
Vol.34, Nr.12, 2001
P.801-808
SN2002-00743
Zenner, H, Pötter, K, Schramm, A, Suhartono, H A
Simulation of fatigue micro crack growth - Part 1: Modelling and results of simulation, micro crack growth, scatter, effect of load condition, density of micro crack seeds and grain size.
Materialwissenschaft und Werkstofftechnik
Vol.32, Nr.11, 2001
P.845-857
SN2002-00744
Lüpfert, H-P, Spies, H-J
Effect of compression stresses on the fatigue strength of metals at uniaxial and multiaxial state of loading.
Materialwissenschaft und Werkstofftechnik
Vol.32, Nr.11, 2001
P.837-844
SN2002-00747
Edrisy, A, Perry, T, Cheng, Y T, Alpas, A T
The effect of humidity on the sliding wear of plasma transfer wire arc thermal sprayed low carbon steel coatings.
Surface and Coatings Technology
Vol.146, Nr.1, 2001
P.571-577
SN2002-00826
Elfick, A P D, Hall, R M, Pinder, I M, Unsworth, A
The effect of socket design, materials and liner thickness on the wear of the porous coated anatomic total hip replacement.
Proceedings of the Institution of Mechanical Engineers -H- Jnl of Engineering in Medicine
Vol.215, Nr.5, 2001
P.447-458
SN2002-00827
Smith, S L, Unsworth, A
An in vitro wear study of alumina-alumina total hip prostheses.
Proceedings of the Institution of Mechanical Engineers -H- Jnl of Engineering in Medicine
Vol.215, Nr.5, 2001
P.443-446
SN2002-00828
Kaddick, C, Wimmer, M A
Hip simulator wear testing according to the newly introduced standard ISO 14242.
Proceedings of the Institution of Mechanical Engineers -H- Jnl of Engineering in Medicine
Vol.215, Nr.5, 2001
P.429-442
SN2002-00870
Chow, C L, Yang, F, Fang, H E
Damage mechanics characterization on the fatigue behaviour of a solder joint material.
Proceedings of the Institution of Mechanical Engineers -C- Jnl of Mechanical Engin Science
Vol.215, Nr.8, 2001
P.883-892
SN2002-00892
Hirakawa, K, Kubota, M
On the fatigue design method for high-speed railway axles.
Proceedings of the Institution of Mechanical Engineers -F- Jnl of Rail and Rapid Transit
Vol.215, Nr.2, 2001
P.73-82
SN2002-00999
Walter, R, Bechtold, G, Friedrich, K, Thomas, Ph
Prüfmaschine für Bratpfannen -- Mechanische Verschleissprüfung von Anti-Haft-Beschichtungen mit automatisierter Bewertung der Oberflächen.
Materialprufung
Vol.43, Nr.11-12, 2001
P.467-472
SN2002-01155
Uhlmann, E, Friemel, J, Brücher, M
Diamant-Technologie - Adhäsiver Verschleiss an CVD-Diamant.
Industrie Diamanten Rundschau
Vol.35, Nr.4, 2001
P.281-287